Instructions
Door Closers Installation Guide & Templates
Door Closers Installation Guide & Templates
Door Closer DC-600 Template
Download
Door Closer DC-300 Template
Download
Watch the following installation tutorial videos
Prime-ware DC-300 DC-600 Door Closer Installation Instructions - Regular Arm Installation
Prime-ware DC-300 DC-600 Door Closer Installation Instructions - Parallel Arm Installation
Prime-ware DC-300 DC-600 Door Closer Installation Instructions - Top Jamb Installation
Door Finger Guard Installation Guide
Prime-Ware Door Finger Pinch Guard How To Install
STEP-BY-STEP INSTALLATION GUIDE
1
OPEN THE DOOR FULLY
Begin with the door in a fully open position. Make sure all surfaces are clean for better adhesion.
2
POSITION THE GUARD
Align the bottom of the guard with the bottom of the door, center the middle of guard to the middle of the hinge gap and mark the bottom corner on the frame.
3
PEEL AND STICK FRAME SIDE
Peel the first adhesive strip and stick to the door frame where you marked.
4
APPLY AND STICK DOOR SIDE
Peel the second strip and press the guard to the door.
5
PRESS FIRMLY
Apply pressure from top to bottom for full adhesion.
6
TEST THE MOVEMENT
Slowly open and close the door to ensure smooth motion.
Hasp Lock Installation Guide
QUICK, STRESS-FREE SETUP
1
Position the hasp lock on your cabinet or door.
2
Mark and drill pilot holes if needed.
3
Secure lock body and catch latch with screws.
4
Insert the key, twist the knob, and your lock is ready.
Contact us for wholesale inquiries, partnership opportunities or general questions